CH9005 is an USB 2.0 HS/FS and UVC compliant camera controller,
The built-in extreme low-power transceiver provides the superior compatibility with USB host
and the best quality for image applications.
— USB 2.0 Controller
CH9005 integrates USB 2.0 transceiver that is optimized for high performance data transfer
rate, high speed MCU and DC-to-DC regulators, sensor controller, color processing and noise
reduction into a single chip
— Image Signal Processing Unit
UVC defined image processing functions are supported by using sensor's ISP engine.
CH9005 supports Gamma/Hue/Saturation/Contrast/Brightness engines processing functions.
These functions are very useful to compensate intrinsic inaccuracy in lens and image sensor to
get better image quality.
— Image Sensor Interface
CH9005 have the programmable 8-bit video data bus with general serial control interface for
video transfer/control with target CMOS image sensor. It can support most available CMOS
sensors from VGA (640x480) to UXGA (1600x1200) resolution.
— Embedded MTP Unit
CH9005 supports both the internal MCU program ROM and external serial EEPROM interface
and embedded MTP Unit
it can be updated the sensor setting and ISP tuning functions several times without external
storage component and configurable vendor ID, product ID and serial number from
Multiple-Time Programmable (MTP).
— Built-in Regulator
CH9005 integrates 3 regulators to save BOM cost and PCB area. One regulator is designed to
convert 3.3V to 2.8V for sensor pixel power. One regulator is designed to convert 3.3V to
1.5V-to-3.1V for sensor I/O power, the other one regulator is designed to convert 3.3V to 1.2V
core power.
— Wide range system clock output
CH9005 can be programmable system clock output for performance and power saving.
Additional clock output with various clock speed ranged up to 96MHz is provided for video
capture module
USB2.0 HS/FS PC Camera Controller
— USB Video Class compliant, works with native driver in Microsoft Windows system
— Embedded MTP memory for sensor setting and ISP tuning functions.
— Supports MTP memory for configuring customized parameters
— Supports external serial EEPROM interface
— Upgrade partial firmware and customized parameters through USB interface
— Built-in 3.3V to 1.5V~ 3.1V adjustable regulator for sensor IO power.
— Built-in 3.3V to 2.8V regulator for sensor pixel power
— Built-in 3.3V to 1.2V regulator for sensor digital I/O Power
— Built-in 3.3V to 1.2V regulator for core power
— Adjustable and dynamic frame rate control on USB transaction
— Automatic frame rate adjustment when exposure in low light environment
— Supports 6 general purpose I/O pins with programmable driving strength
— Purpose I/O for LED indicator on video streaming
— Package is QFN-32(5x5mm)
